Technical Documents
Specifications
Brand
STMicroelectronicsPower Switch Topology
High Side
Product Type
Power Switch IC
Power Switch Type
High Side
Switch On Resistance RdsOn
50mΩ
Mount Type
Surface
Minimum Supply Voltage
8V
Package Type
PowerSSO-24
Pin Count
24
Maximum Supply Voltage
60V
Operating Current
5.6A
Maximum Operating Temperature
150°C
Minimum Operating Temperature
-40°C
Length
10.5mm
Height
2.47mm
Standards/Approvals
IEC 61000-4-4, IEC 61000-4-2, IEC 61000-4-5
Automotive Standard
No
Series
IPS2050H
Product Details
The STMicroelectronics IPS2050H and IPS2050H-32 are dual high-side switch ICs able to drive capacitive, resistive or inductive loads with one side connected to ground. The very low RDS-ON (≤ 50 mΩ up to TJ = 125 °C) makes the IC suitable for applications with up to 2.4 A / 5.6 A steady state operating current. Each output channel is independently protected against junction over-temperature events by a junction temperature sensor, and a further temperature sensor is included to monitor case temperature, so an overheated output channel can only be turned back ON when the case temperature returns below the reset temperature.
The embedded per-channel overload protection circuit monitors the output current and, on triggering of the activation threshold (IPK-X), starts modulating the impedance of the output switch to limit the output current to ILIM-X, for both IC and load protection. The IC diagnostics is based on two FAULT pins (current source), one for each channel. Each FAULT pin is activated by an overload or an over-temperature event on the related channel.
Stock information temporarily unavailable.
SR 66.00
SR 33.00 Each (In a Pack of 2) (ex VAT)
SR 75.90
SR 37.95 Each (In a Pack of 2) (inc. VAT)
Standard
2
SR 66.00
SR 33.00 Each (In a Pack of 2) (ex VAT)
SR 75.90
SR 37.95 Each (In a Pack of 2) (inc. VAT)
Stock information temporarily unavailable.
Standard
2
Technical Documents
Specifications
Brand
STMicroelectronicsPower Switch Topology
High Side
Product Type
Power Switch IC
Power Switch Type
High Side
Switch On Resistance RdsOn
50mΩ
Mount Type
Surface
Minimum Supply Voltage
8V
Package Type
PowerSSO-24
Pin Count
24
Maximum Supply Voltage
60V
Operating Current
5.6A
Maximum Operating Temperature
150°C
Minimum Operating Temperature
-40°C
Length
10.5mm
Height
2.47mm
Standards/Approvals
IEC 61000-4-4, IEC 61000-4-2, IEC 61000-4-5
Automotive Standard
No
Series
IPS2050H
Product Details
The STMicroelectronics IPS2050H and IPS2050H-32 are dual high-side switch ICs able to drive capacitive, resistive or inductive loads with one side connected to ground. The very low RDS-ON (≤ 50 mΩ up to TJ = 125 °C) makes the IC suitable for applications with up to 2.4 A / 5.6 A steady state operating current. Each output channel is independently protected against junction over-temperature events by a junction temperature sensor, and a further temperature sensor is included to monitor case temperature, so an overheated output channel can only be turned back ON when the case temperature returns below the reset temperature.
The embedded per-channel overload protection circuit monitors the output current and, on triggering of the activation threshold (IPK-X), starts modulating the impedance of the output switch to limit the output current to ILIM-X, for both IC and load protection. The IC diagnostics is based on two FAULT pins (current source), one for each channel. Each FAULT pin is activated by an overload or an over-temperature event on the related channel.