Fluke I30 Current Clamp, 30 A DC Max, AC/DC Adapter, 30 A ac AC Max, Current Output

Fluke Current Clamp, 30A Maximum DC Current, 20A Maximum AC Current - Fluke i30

This current clamp measures both AC and DC current using Hall effect sensing for non-intrusive measurement in industrial and field environments. It connects to multimeters and recording instruments via a 4 mm plug and operates safely at CAT III 300 V for on-site electrical diagnostics and monitoring.

Features and Benefits:

• Measures up to 30 A DC for broad current range capability
  Accurately resolves down to ±1%+2 mA for precise readings
  Frequency response DC to 20 kHz for high-frequency signals
  100 mV/A output sensitivity for straightforward instrument interfacing
  Manual zero adjust via thumbwheel for fast baseline correction
  Powered by 9 V alkaline battery providing approximately 30 h operation

Applications

• Suitable for diagnostics with handheld multimeters and recorders
  Used for maintenance on installations rated to CAT III 300 V
  Ideal for measuring large conductors up to 19 mm diameter
  Can be used for both DC system commissioning and AC troubleshooting
  Used with data loggers for transient or high-frequency current capture

What connection does it provide for multimeter integration?

It provides a 4 mm safety output connection compatible with standard multimeter inputs.

How is the clamp powered and how long will it run on one battery?

It uses a 9 V alkaline battery and operates for about 30 h with a low-battery indicator.

What operating temperatures does it support during use?

It is specified for operation between 0 °C and 50 °C.

What load conditions must connected instruments meet for accurate readings?

The clamp expects a load impedance greater than 100 kΩ and capacitance up to 100 pF for correct performance.

What supply and loading conditions ensure accurate readings?

Use a 9V alkaline PP3 battery and connect to instruments with input impedance greater than 10 kΩ and capacitance up to 100 pF.

Supplied with

Alkaline PP3 battery and operators manual.

Warning

Use of the probe on uninsulated conductors is limited to 300V ac rms or dc and frequencies below 1 kHz.