SKF 2204 E-2RS1TN9 20 mm ID 2 Row Self-Aligning Ball Bearing -, 47 mm OD
Technical Document
Specifications
Brand
SKFProduct Type
Self-Aligning Ball Bearing
Inside Diameter
20mm
Outside Diameter
47mm
Race Width
18mm
Cage Material
Non-Metallic
Ball Material
Steel
Number of Rows
2
Internal Clearance
CN
Static Load Rating
3.4kN
Dynamic Load Rating
12.7kN
Bore Type
Taper
Standards/Approvals
No
Series
2 Light
Limiting Speed
10000rpm
Race Type
Plain
Bearing Type
Self-Aligning
Product details
Double Row Self - Aligning
Radial Self-Aligning Ball Bearing
These bearings are designed to accommodate shaft deflection when running and will also cope with initial misalignment. The double row bearing is designed primarily to withstand radial load with a small capacity for axial load. Also available with ring seals (rubbing seals) made from oil-resistant, non-wearing synthetic rubber with steel reinforcement on both sides (Type 2RS1).
Open Bearings
ETN9 and KTN9 are Open self-aligning bearings without a seal available in parallel or Taper bores.
Sealed bearings
2RS1TN9 are sealed (NBR) bearings packed with grease with a lithium thickener suitable for temperatures from -40°C to + 100°C. They are sealed for life, so should not be heated above 80°C before mounting and must not be washed out under any circumstances.
TN suffix denotes polyamide cage
Supplied with
instruction leaflet.
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Stock information temporarily unavailable.
SR 304.00
SR 304.00 Each (ex VAT)
SR 349.60
SR 349.60 Each (inc. VAT)
1
SR 304.00
SR 304.00 Each (ex VAT)
SR 349.60
SR 349.60 Each (inc. VAT)
Stock information temporarily unavailable.
1
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products
Technical Document
Specifications
Brand
SKFProduct Type
Self-Aligning Ball Bearing
Inside Diameter
20mm
Outside Diameter
47mm
Race Width
18mm
Cage Material
Non-Metallic
Ball Material
Steel
Number of Rows
2
Internal Clearance
CN
Static Load Rating
3.4kN
Dynamic Load Rating
12.7kN
Bore Type
Taper
Standards/Approvals
No
Series
2 Light
Limiting Speed
10000rpm
Race Type
Plain
Bearing Type
Self-Aligning
Product details
Double Row Self - Aligning
Radial Self-Aligning Ball Bearing
These bearings are designed to accommodate shaft deflection when running and will also cope with initial misalignment. The double row bearing is designed primarily to withstand radial load with a small capacity for axial load. Also available with ring seals (rubbing seals) made from oil-resistant, non-wearing synthetic rubber with steel reinforcement on both sides (Type 2RS1).
Open Bearings
ETN9 and KTN9 are Open self-aligning bearings without a seal available in parallel or Taper bores.
Sealed bearings
2RS1TN9 are sealed (NBR) bearings packed with grease with a lithium thickener suitable for temperatures from -40°C to + 100°C. They are sealed for life, so should not be heated above 80°C before mounting and must not be washed out under any circumstances.
TN suffix denotes polyamide cage
Supplied with
instruction leaflet.
Ideate. Create. Collaborate
JOIN FOR FREE
No hidden fees!
- Download and use our DesignSpark software for your PCB and 3D Mechanical designs
- View and contribute website content and forums
- Download 3D Models, Schematics and Footprints from more than a million products