Molex Premise Networks ST to ST Duplex Multi Mode OM1 Fibre Optic Cable, 62.5/125μm, Orange, 2m
Technical Document
Specifications
Connector 1
ST
Length
2m
Propagation Mode
Multi Mode
Connector 2
ST
Terminated/Unterminated
Terminated
Core Diameter
62.5/125µm
Sheath Colour
Orange
Cable Construction
Duplex
Fibre Type
OM1
Maximum Operating Temperature
+85°C
Attenuation
1 dB
Sheath Material
Low Smoke Zero Halogen (LSZH)
Minimum Operating Temperature
-40°C
Minimum Bend Radius
30 mm
Maximum Pulling Tension
100N
Series
91
Country of Origin
Poland
Product details
Higher Bandwidth
Multimode fibre fully supports 850 nm (SX) serial 10 Gb/s applications over 300 m. An effective bandwidth of 2000 MHz/km at 850 nm under laser launch is ensured with conformance to the 850 nm Differential Mode Delay test method.,The assemblies are manufactured in accordance with the specifications defined within BS:7718.
0.35dB or less insertion loss
Enhanced bandwidth capability
LSZH sheath, complying with IEC332.1 and 332.3
Stock information temporarily unavailable.
Please check again later.
SR 278.63
Each (ex VAT)
SR 320.42
Each (inc. VAT)
1
SR 278.63
Each (ex VAT)
SR 320.42
Each (inc. VAT)
1
Technical Document
Specifications
Connector 1
ST
Length
2m
Propagation Mode
Multi Mode
Connector 2
ST
Terminated/Unterminated
Terminated
Core Diameter
62.5/125µm
Sheath Colour
Orange
Cable Construction
Duplex
Fibre Type
OM1
Maximum Operating Temperature
+85°C
Attenuation
1 dB
Sheath Material
Low Smoke Zero Halogen (LSZH)
Minimum Operating Temperature
-40°C
Minimum Bend Radius
30 mm
Maximum Pulling Tension
100N
Series
91
Country of Origin
Poland
Product details
Higher Bandwidth
Multimode fibre fully supports 850 nm (SX) serial 10 Gb/s applications over 300 m. An effective bandwidth of 2000 MHz/km at 850 nm under laser launch is ensured with conformance to the 850 nm Differential Mode Delay test method.,The assemblies are manufactured in accordance with the specifications defined within BS:7718.
0.35dB or less insertion loss
Enhanced bandwidth capability
LSZH sheath, complying with IEC332.1 and 332.3