Technical Document
Specifications
Brand
EatonNumber of Poles
3P
Maximum Current
20A
Mounting Type
Surface Mount
IP Rating
IP65
Power Rating
6.5kW
Voltage Rating
440V ac
Electrical Phase
3
Handle Colour
Red
Accepts Padlocks
Yes
Enclosed/Not Enclosed
Enclosed
Switch Rating
320A
Length
137mm
Width
80mm
Depth
75mm
Terminal Type
Screw
Minimum Operating Temperature
-25°C
Throw Configuration
Single
Maximum Operating Temperature
+50°C
Country of Origin
United Kingdom
Product details
Eaton Enclosed Isolator Switch
Eaton's isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.
Features & Benefits
The perfect solution for installing as a safety measure
Used as an emergency switching off/emergency stop device
The basic functions: used as a main switch, maintenance switch or manual override switch
Thermoplastic, high impact surface mounting enclosure with an IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions
Built-in earth commoning block
Lockable in the 0/OFF position, with up to three padlocks
Totally insulated
Red rotary handle and yellow locking ring, providing an aesthetically pleasing finish
What is the difference between a fused switch disconnector and a non-fused switch disconnector?
Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.
Stock information temporarily unavailable.
Please check again later.
SR 295.92
1 Box of 1 (ex VAT)
SR 340.31
1 Box of 1 (inc. VAT)
1
SR 295.92
1 Box of 1 (ex VAT)
SR 340.31
1 Box of 1 (inc. VAT)
1
Technical Document
Specifications
Brand
EatonNumber of Poles
3P
Maximum Current
20A
Mounting Type
Surface Mount
IP Rating
IP65
Power Rating
6.5kW
Voltage Rating
440V ac
Electrical Phase
3
Handle Colour
Red
Accepts Padlocks
Yes
Enclosed/Not Enclosed
Enclosed
Switch Rating
320A
Length
137mm
Width
80mm
Depth
75mm
Terminal Type
Screw
Minimum Operating Temperature
-25°C
Throw Configuration
Single
Maximum Operating Temperature
+50°C
Country of Origin
United Kingdom
Product details
Eaton Enclosed Isolator Switch
Eaton's isolator switch can sometimes be referred to as a switch disconnector, this is because it has been created and designed to safely isolate a circuit whilst it is being used or maintained. This isolator switch breaks or isolates a circuit through the rotation of the rotary handle and locking ring. This type of non-fused isolator switch will be found isolating circuit breakers, transmission lines, transformers and a multitude of other applications.
Features & Benefits
The perfect solution for installing as a safety measure
Used as an emergency switching off/emergency stop device
The basic functions: used as a main switch, maintenance switch or manual override switch
Thermoplastic, high impact surface mounting enclosure with an IP65 rating - this means that the enclosure part of the isolator has ingress protection against dust and is also protected against low-pressure jets of water that comes from all directions
Built-in earth commoning block
Lockable in the 0/OFF position, with up to three padlocks
Totally insulated
Red rotary handle and yellow locking ring, providing an aesthetically pleasing finish
What is the difference between a fused switch disconnector and a non-fused switch disconnector?
Unlike fused switch disconnectors, a non-fuse isolator switch does not use a fuse to break or put a circuit into isolation, they instead use a rotary to disconnect or isolate a circuit.