Brady Red Pneumatic Lockout, 6.5mm Shackle, 12mm Attachment

RS Stock No.: 305-9229Brand: BradyManufacturers Part No.: 064221
brand-logo
View all in Lockouts

Technical Document

Specifications

Brand

Brady

Type

Pneumatic Lockout

Colour

Red

Attachment Point Minimum Size

6mm

Attachment Point Maximum Size

12mm

Lock Shackle Maximum Diameter

6.5mm

Country of Origin

Belgium

Product details

Pneumatic lockout

The pneumatic lockout is used to isolate pneumatic energy sources without the expense and inconvenience of fitting a lock valve.
It fits straight onto the connector through which any installation is connected to its source of compressed air. Can be used on most connectors of 63.5 mm, 95.2 mm or 125 mm.
The centre hole in the lockout device can be used to permanently secure the air hose. The side loops can be used to hook the end of the hose onto the lockout device.
Must be used with a padlock with a shackle diameter of 63.5 or 71.4 mm.

Stock information temporarily unavailable.

Please check again later.

Stock information temporarily unavailable.

SR 115.54

Each (ex VAT)

SR 132.87

Each (inc VAT)

Brady Red Pneumatic Lockout, 6.5mm Shackle, 12mm Attachment

1

Available in multiples of 1
1SR 115.54
2SR 231.08
3SR 346.62
4SR 462.16
5SR 577.70
6SR 693.24
7SR 808.78
8SR 924.32
9SR 1,039.86
10SR 1,155.40
11SR 1,270.94
12SR 1,386.48
13SR 1,502.02
14SR 1,617.56
15SR 1,733.10

SR 115.54

Each (ex VAT)

SR 132.87

Each (inc VAT)

Brady Red Pneumatic Lockout, 6.5mm Shackle, 12mm Attachment
Stock information temporarily unavailable.

1

Available in multiples of 1
1SR 115.54
2SR 231.08
3SR 346.62
4SR 462.16
5SR 577.70
6SR 693.24
7SR 808.78
8SR 924.32
9SR 1,039.86
10SR 1,155.40
11SR 1,270.94
12SR 1,386.48
13SR 1,502.02
14SR 1,617.56
15SR 1,733.10

Technical Document

Specifications

Brand

Brady

Type

Pneumatic Lockout

Colour

Red

Attachment Point Minimum Size

6mm

Attachment Point Maximum Size

12mm

Lock Shackle Maximum Diameter

6.5mm

Country of Origin

Belgium

Product details

Pneumatic lockout

The pneumatic lockout is used to isolate pneumatic energy sources without the expense and inconvenience of fitting a lock valve.
It fits straight onto the connector through which any installation is connected to its source of compressed air. Can be used on most connectors of 63.5 mm, 95.2 mm or 125 mm.
The centre hole in the lockout device can be used to permanently secure the air hose. The side loops can be used to hook the end of the hose onto the lockout device.
Must be used with a padlock with a shackle diameter of 63.5 or 71.4 mm.