Technical Document
Specifications
Brand
Aim-TTiModel Number
TGR6000
Frequency Resolution
10Hz
Maximum Frequency Range Sinewave
6GHz
Minimum Frequency Range Sinewave
10MHz
Time Base Accuracy
<±1ppm
Output Impedance
50Ω
Interface Type
GPIB, LAN, RS232, USB
Country of Origin
United Kingdom
Product details
Aim-TTi TGR6000 6GHz RF Signal Generator
The TGR6000 is a low-cost 6GHz signal generator intended for CW (carrier wave) applications where modulation is not required. Low phase noise is matched by low leakage, low residual FM and spurii. The internal timebase has a 1ppm stability, and an external frequency reference can be used. Sophisticated sweep functions enable the frequency and/or amplitude to be swept over the full range of each in a single sweep.
0MHz to 6000MHz frequency range
10Hz setability, +/-1ppm frequency stability
Locking to external frequency standard
-110dBm to +7dBm amplitude, 0.1dB steps
Fast stepping sweep with dwell times down to 10ms
List sweep of up to 1000 points of amplitude vs frequency
User compensation tables for specific test set-ups
Storage for 12 generator set-ups and 16 sweep lists
Compact half-rack 2U casing uses minimum bench space
Full remote control through RS232, USB, LAN and GPIB
Significantly lower cost than other 6GHz generators
Supplied with
Operating manual, driver software, power lead
Stock information temporarily unavailable.
Please check again later.
SR 28,961.62
Each (ex VAT)
SR 33,305.86
Each (inc. VAT)
1
SR 28,961.62
Each (ex VAT)
SR 33,305.86
Each (inc. VAT)
1
Technical Document
Specifications
Brand
Aim-TTiModel Number
TGR6000
Frequency Resolution
10Hz
Maximum Frequency Range Sinewave
6GHz
Minimum Frequency Range Sinewave
10MHz
Time Base Accuracy
<±1ppm
Output Impedance
50Ω
Interface Type
GPIB, LAN, RS232, USB
Country of Origin
United Kingdom
Product details
Aim-TTi TGR6000 6GHz RF Signal Generator
The TGR6000 is a low-cost 6GHz signal generator intended for CW (carrier wave) applications where modulation is not required. Low phase noise is matched by low leakage, low residual FM and spurii. The internal timebase has a 1ppm stability, and an external frequency reference can be used. Sophisticated sweep functions enable the frequency and/or amplitude to be swept over the full range of each in a single sweep.
0MHz to 6000MHz frequency range
10Hz setability, +/-1ppm frequency stability
Locking to external frequency standard
-110dBm to +7dBm amplitude, 0.1dB steps
Fast stepping sweep with dwell times down to 10ms
List sweep of up to 1000 points of amplitude vs frequency
User compensation tables for specific test set-ups
Storage for 12 generator set-ups and 16 sweep lists
Compact half-rack 2U casing uses minimum bench space
Full remote control through RS232, USB, LAN and GPIB
Significantly lower cost than other 6GHz generators
Supplied with
Operating manual, driver software, power lead