Aim-TTi Digital Bench Power Supply, 1-Output 0 V ac to 20V, 400 W
Technical Document
Specifications
Brand
Aim-TTiProduct Type
Bench Power Supply
Maximum Output Current
20A
Number of Outputs
1
Maximum Output Voltage
20V
Power
400W
Minimum Supply Voltage
230V ac
Plug Type
IEC 320
Maximum Supply Voltage
230V ac
Output Type
Digital
Digital/Analogue
Digital
Minimum Operating Temperature
5°C
Supported Number of Displays
2
Maximum Operating Temperature
40°C
Standards/Approvals
No
Minimum Output Voltage
0V ac
Minimum Output Current
20A
Calibrated
UKAS
Country of Origin
United Kingdom
Product details
EX-R Series Single, Dual and Triple Output PSUs
The EX-R series of compact mixed-mode regulated power supplies offers output power from 175 → 420W. The models have high resolution four digit meters and switchable remote sense terminals.
Mixed-mode regulated with linear final regulation
Constant voltage or constant current with automatic cross-over
4 digit meters with 10mV and 1mA resolution
Switchable remote sense terminals for perfect regulation at the load
DC output switch enables voltage/current setup without load connected
Safety terminals accept fixed shroud 4mm plugs plus forks and wires
Silent fan-free convection cooling all models except EX2020R & EX4210R (intelligent fan cooling)
EX Series: EX355P
Opto-isolated RS-232 interface
Front panel controls can be locked out
The EX355P is a digitally controlled version of the EX355 with an isolated RS-232 interface. It offers a low cost solution for a basic programmable PSU, and will be sufficient for many applications where the sophistication and complexity of GPIB are not needed. A simple command set allows remote control of voltage, current and output along with read-back of metering values and operational status. Local control is via three rotary encoders providing rapid and accurate setting of voltage and current.
EX752M Digital Multi-mode Dual Output PSU
Separate voltage and current meters for each output
Safety output terminals
EX-R Series Dual and Triple Output PSUs EX354RD & EX354RT
Switchable remote sense terminals for perfect regulation at the load
EX354RT has auxiliary output of 1.5V to 5V at 5A
Supplied with
user manual and mains lead
Approvals
EN61010-1 (Safety) and EN61326 (EMC)
Stock information temporarily unavailable.
SR 5,245.00
SR 5,245.00 Each (ex VAT)
SR 6,031.75
SR 6,031.75 Each (inc. VAT)
Calibration type
UKAS Calibration
1
SR 5,245.00
SR 5,245.00 Each (ex VAT)
SR 6,031.75
SR 6,031.75 Each (inc. VAT)
Stock information temporarily unavailable.
Calibration type
UKAS Calibration
1
Technical Document
Specifications
Brand
Aim-TTiProduct Type
Bench Power Supply
Maximum Output Current
20A
Number of Outputs
1
Maximum Output Voltage
20V
Power
400W
Minimum Supply Voltage
230V ac
Plug Type
IEC 320
Maximum Supply Voltage
230V ac
Output Type
Digital
Digital/Analogue
Digital
Minimum Operating Temperature
5°C
Supported Number of Displays
2
Maximum Operating Temperature
40°C
Standards/Approvals
No
Minimum Output Voltage
0V ac
Minimum Output Current
20A
Calibrated
UKAS
Country of Origin
United Kingdom
Product details
EX-R Series Single, Dual and Triple Output PSUs
The EX-R series of compact mixed-mode regulated power supplies offers output power from 175 → 420W. The models have high resolution four digit meters and switchable remote sense terminals.
Mixed-mode regulated with linear final regulation
Constant voltage or constant current with automatic cross-over
4 digit meters with 10mV and 1mA resolution
Switchable remote sense terminals for perfect regulation at the load
DC output switch enables voltage/current setup without load connected
Safety terminals accept fixed shroud 4mm plugs plus forks and wires
Silent fan-free convection cooling all models except EX2020R & EX4210R (intelligent fan cooling)
EX Series: EX355P
Opto-isolated RS-232 interface
Front panel controls can be locked out
The EX355P is a digitally controlled version of the EX355 with an isolated RS-232 interface. It offers a low cost solution for a basic programmable PSU, and will be sufficient for many applications where the sophistication and complexity of GPIB are not needed. A simple command set allows remote control of voltage, current and output along with read-back of metering values and operational status. Local control is via three rotary encoders providing rapid and accurate setting of voltage and current.
EX752M Digital Multi-mode Dual Output PSU
Separate voltage and current meters for each output
Safety output terminals
EX-R Series Dual and Triple Output PSUs EX354RD & EX354RT
Switchable remote sense terminals for perfect regulation at the load
EX354RT has auxiliary output of 1.5V to 5V at 5A
Supplied with
user manual and mains lead
Approvals
EN61010-1 (Safety) and EN61326 (EMC)