TE Connectivity Blue Polyolefin Solder Sleeve 18.54mm Length 0.76 → 1.52mm Cable Diameter

RS Stock No.: 391-980Brand: TE ConnectivityManufacturers Part No.: D-110-28
brand-logo
View all in Solder Sleeves

Technical Document

Specifications

Minimum Cable Diameter

0.76mm

Maximum Cable Diameter

1.52mm

Sleeve Length

18.54mm

Material

Polyolefin

Voltage Rating

600 V

Minimum Operating Temperature

-5°C

Maximum Operating Temperature

+125°C

Colour

Blue

Series

D-110

Standards Met

ANSI J-STD-004, ANSI J-STD-006

Country of Origin

Mexico

Product details

Solder Sleeves®

A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.

Stock information temporarily unavailable.

Please check again later.

Stock information temporarily unavailable.

SR 6.20

Each (In a Pack of 500) (ex VAT)

SR 7.13

Each (In a Pack of 500) (inc. VAT)

TE Connectivity Blue Polyolefin Solder Sleeve 18.54mm Length 0.76 → 1.52mm Cable Diameter

SR 6.20

Each (In a Pack of 500) (ex VAT)

SR 7.13

Each (In a Pack of 500) (inc. VAT)

TE Connectivity Blue Polyolefin Solder Sleeve 18.54mm Length 0.76 → 1.52mm Cable Diameter
Stock information temporarily unavailable.

Technical Document

Specifications

Minimum Cable Diameter

0.76mm

Maximum Cable Diameter

1.52mm

Sleeve Length

18.54mm

Material

Polyolefin

Voltage Rating

600 V

Minimum Operating Temperature

-5°C

Maximum Operating Temperature

+125°C

Colour

Blue

Series

D-110

Standards Met

ANSI J-STD-004, ANSI J-STD-006

Country of Origin

Mexico

Product details

Solder Sleeves®

A one piece soldering system for jointing signal cables and terminating cable screens. The system consists of heat shrinkable sleeve containing a predetermined amount of fluxed solder and a thermoplastic sealing insert at each end. The solder sleeve is placed over the joint to be made and the sleeve is heated by a heat gun. The sleeve shrinks, the sealing inserts melt and flow and the solder starts to melt. Heating is continued until the solder is seen to fully melt and flow. Temperature range -55°C to +125°C.