RS PRO Lighting Controller Detector, PIR/Daylight, Ceiling Mount, 220 → 240 V ac, 76mm Diameter
Technical Document
Specifications
Brand
RS ProController Type
Detector
Sensor Type
PIR/Daylight
Voltage Rating
220 → 240 V ac
Mount Type
Ceiling
Range
7 x 2.8 m
Dimmable
Yes
Diameter
76mm
Time Delay
10 s → 99 min
Height
65mm
Product details
PIR and Daylight Dimming Controller
Combined photocell and PIR for automatic control of indoor lighting levels when used with 1-10V dimming ballasts
Daylight compensation maintains constant light levels, also compensates for the effect of new tubes etc.
Can be flush or surface mounted with adaptors supplied
If no movement is detected, the unit can be set to turn lights off or dim for 5 minutes before final switch off
Occupancy Lighting Controllers
Lighting controllers designed for use within offices and warehouses. Available with dual sensors for detecting ambient light and physical movement. Outputs are in the form of switch contacts (standard types). A dimming control output version is available for use with electronic ballasts. This can control up to 10 ballasts, ideal where daylight compensation is required with constant ambient light.
Stock information temporarily unavailable.
Please check again later.
P.O.A.
1
P.O.A.
1
Technical Document
Specifications
Brand
RS ProController Type
Detector
Sensor Type
PIR/Daylight
Voltage Rating
220 → 240 V ac
Mount Type
Ceiling
Range
7 x 2.8 m
Dimmable
Yes
Diameter
76mm
Time Delay
10 s → 99 min
Height
65mm
Product details
PIR and Daylight Dimming Controller
Combined photocell and PIR for automatic control of indoor lighting levels when used with 1-10V dimming ballasts
Daylight compensation maintains constant light levels, also compensates for the effect of new tubes etc.
Can be flush or surface mounted with adaptors supplied
If no movement is detected, the unit can be set to turn lights off or dim for 5 minutes before final switch off
Occupancy Lighting Controllers
Lighting controllers designed for use within offices and warehouses. Available with dual sensors for detecting ambient light and physical movement. Outputs are in the form of switch contacts (standard types). A dimming control output version is available for use with electronic ballasts. This can control up to 10 ballasts, ideal where daylight compensation is required with constant ambient light.