Nexperia PMD3001D,115, MOSFET 1, 40V 6-Pin, TSOP
Technical Document
Specifications
Country of Origin
China
Product details
LKM 281 Digital Programmable Measuring Transducer
The LKM 281 series is a digital programmable galvanically isolated measuring transducer for thermocouples. The transducer is mounted on standard rails and is designed in three wire. The LKM 281 transducer was designed to be used in cars. The transducer has a high interference immunity plus a wide range of voltages even a supply voltage of 8V you can obtain a liner output signal of 20 mA. A slim 6mm design means this transducer takes little space on a standard rail and has optimum shock resistance.
An added benefit to all users is that this measuring transducer can be programmed for a variety of thermocouples all to DIN EN 60584-3.The sensors thermoelectric emfs are converted temperature linearly into the output signal which ranges from 0 to 20 mA. This is where temperature compensation takes place within the measuring transducer which is configured via a micro USB port.
Input Thermocouples - K, J, L, T, U, E, N, S, B, R, C
Span: 50K
Linearity error: 0.3K
Measurement error: 0.2%
Error of reference junction: +/- 0.5°C
Supply voltage: 8 to 35 VDC
Maximum current consumption: 23mA
Galvanic isolation: 2.5kV
Output: 4 to 20 mA / 20 to 4mA / 2 to 20 mA / 20 to 0 mA 3 wire
Sensor break: 20 mA
Short circuit: voltage value for room temperature
Response time: 0.5s
TC: 100ppm/K
Operating temperature range: -40 to 85°C
Humidity: 95%
Mounting: 35mm DIN-rail
Material: polyester
Dimensions: 100x6x93mm (HxWxD)
Type of terminals: screw terminals spring-cage terminals are optional
Clamping range: 0.2 to 2.5mm²
Weight: approx.54g
Vibration: 147 to 500Hz / 300 m/s² 500Hz to 2K / 200 m/s²
Approvals
EN61326-1:2006
EN61326-2-3:2006
Stock information temporarily unavailable.
Please check again later.
SR 0.75
Each (In a Pack of 20) (ex VAT)
SR 0.862
Each (In a Pack of 20) (inc VAT)
20
SR 0.75
Each (In a Pack of 20) (ex VAT)
SR 0.862
Each (In a Pack of 20) (inc VAT)
20
Technical Document
Specifications
Country of Origin
China
Product details
LKM 281 Digital Programmable Measuring Transducer
The LKM 281 series is a digital programmable galvanically isolated measuring transducer for thermocouples. The transducer is mounted on standard rails and is designed in three wire. The LKM 281 transducer was designed to be used in cars. The transducer has a high interference immunity plus a wide range of voltages even a supply voltage of 8V you can obtain a liner output signal of 20 mA. A slim 6mm design means this transducer takes little space on a standard rail and has optimum shock resistance.
An added benefit to all users is that this measuring transducer can be programmed for a variety of thermocouples all to DIN EN 60584-3.The sensors thermoelectric emfs are converted temperature linearly into the output signal which ranges from 0 to 20 mA. This is where temperature compensation takes place within the measuring transducer which is configured via a micro USB port.
Input Thermocouples - K, J, L, T, U, E, N, S, B, R, C
Span: 50K
Linearity error: 0.3K
Measurement error: 0.2%
Error of reference junction: +/- 0.5°C
Supply voltage: 8 to 35 VDC
Maximum current consumption: 23mA
Galvanic isolation: 2.5kV
Output: 4 to 20 mA / 20 to 4mA / 2 to 20 mA / 20 to 0 mA 3 wire
Sensor break: 20 mA
Short circuit: voltage value for room temperature
Response time: 0.5s
TC: 100ppm/K
Operating temperature range: -40 to 85°C
Humidity: 95%
Mounting: 35mm DIN-rail
Material: polyester
Dimensions: 100x6x93mm (HxWxD)
Type of terminals: screw terminals spring-cage terminals are optional
Clamping range: 0.2 to 2.5mm²
Weight: approx.54g
Vibration: 147 to 500Hz / 300 m/s² 500Hz to 2K / 200 m/s²
Approvals
EN61326-1:2006
EN61326-2-3:2006