Technical Document
Specifications
Voltage Reference
External
Number of DAC Channels
3
Output Polarity
Unipolar
Architecture
Current Steering
Power Supply Type
Single
Minimum Operating Temperature
-40 °C
Digital Interface Type
Parallel
Mounting Type
Surface Mount
Resolution
8 bit
Maximum Operating Temperature
+125 °C
Maximum Settling Time
12ns
Integral Nonlinearity Error
±0.5LSB
Pin Count
48
Conversion Rate
180Msps
Typical Single Supply Voltage
3 → 3.6 V
Brand
EXARPackage Type
TQFP
Dimensions
7 x 7 x 1mm
Country of Origin
China
Product details
LinkRunner Pro Network Multimeter
LinkRunner Pro enables technicians to resolve a broader range of todays connectivity problems. Unlike traditional 10//100 link testers, LinkRunner Pro verifies Gigabit link – increasingly important for todays high-performance networks. It also pings up to 10 key devices, detects Power over Ethernet (PoE), resolves 802.1X security conflicts, verifies cable wiremap, and identifies the nearest switch port with Cisco, Extreme and IEEE Link Layer Discovery Protocols (CDP/EDP/LLDP). Built-in IntelliTone digital toning precisely locates cables at patch panels and switches. Link status reports can be uploaded from USB port and routed with trouble tickets to expedite problem resolution.
Link at 10/100/Gig – identify device capabilities and confirm actual speed/duplex statusPing key devices – measure response of DHCP, router, DNS, and other devices or URLs Verify 802.1X settings – authenticate with EAP type, user name, certificates, and passwordDetect PoE service – verify voltage level, and pairs to IEEE 802.3af specificationsIdentify switch port – supports Cisco, Extreme, and IEEE Link Layer Discovery ProtocolsTest cable wiremap – measure length; detect miswires, shorts, split pairs or opensLocate and ID cable – use IntelliTone or optional IDs to locate cables at patch panels Document results – upload link status reports with USB port for faster problem resolution
Stock information temporarily unavailable.
Please check again later.
P.O.A.
1
P.O.A.
1
Technical Document
Specifications
Voltage Reference
External
Number of DAC Channels
3
Output Polarity
Unipolar
Architecture
Current Steering
Power Supply Type
Single
Minimum Operating Temperature
-40 °C
Digital Interface Type
Parallel
Mounting Type
Surface Mount
Resolution
8 bit
Maximum Operating Temperature
+125 °C
Maximum Settling Time
12ns
Integral Nonlinearity Error
±0.5LSB
Pin Count
48
Conversion Rate
180Msps
Typical Single Supply Voltage
3 → 3.6 V
Brand
EXARPackage Type
TQFP
Dimensions
7 x 7 x 1mm
Country of Origin
China
Product details
LinkRunner Pro Network Multimeter
LinkRunner Pro enables technicians to resolve a broader range of todays connectivity problems. Unlike traditional 10//100 link testers, LinkRunner Pro verifies Gigabit link – increasingly important for todays high-performance networks. It also pings up to 10 key devices, detects Power over Ethernet (PoE), resolves 802.1X security conflicts, verifies cable wiremap, and identifies the nearest switch port with Cisco, Extreme and IEEE Link Layer Discovery Protocols (CDP/EDP/LLDP). Built-in IntelliTone digital toning precisely locates cables at patch panels and switches. Link status reports can be uploaded from USB port and routed with trouble tickets to expedite problem resolution.
Link at 10/100/Gig – identify device capabilities and confirm actual speed/duplex statusPing key devices – measure response of DHCP, router, DNS, and other devices or URLs Verify 802.1X settings – authenticate with EAP type, user name, certificates, and passwordDetect PoE service – verify voltage level, and pairs to IEEE 802.3af specificationsIdentify switch port – supports Cisco, Extreme, and IEEE Link Layer Discovery ProtocolsTest cable wiremap – measure length; detect miswires, shorts, split pairs or opensLocate and ID cable – use IntelliTone or optional IDs to locate cables at patch panels Document results – upload link status reports with USB port for faster problem resolution