5m Rubber Cover Hydraulic Hose, 293 bar

RS Stock No.: 728-382Brand: ParkerManufacturers Part No.: 381-8
brand-logo
View all in Hose Pipe & Flexible Tubes

Technical Document

Specifications

Brand

Parker

Manufacturer Series

381

Length

5m

Hose Outside Diameter

22.2mm

Inner Hose Material

Nitrile Rubber

Reinforcing Material

Steel

Cover Material

Rubber

Maximum Operating Pressure

293 bar

Maximum Operating Temperature

+100°C

Minimum Operating Temperature

-40°C

Product details

No-Skive Hose Type 381

High quality flexible hoses suitable for high pressure service
Synthetic rubber outer hose, reinforced with high tensile steel wire. Inner lining, Buna N (Nitrile)
Suitable for use with Series 30 reusable fittings
Temperature range -40°C to +100°C
Applications include high pressure service with petroleum base hydraulic fluids, water-glycol and water-oil emulsion hydraulic fluids, hot oil, grease, lubricants, crude and fuel oils, air and water
Supplied in 5m coils

Exceeds the following manufacturing standards: to DIN 20022 2SN-SAE 100 R2AT-150 1436//11
Pin prick cover for air or gas applications above 14 bar (200 psi)
Chemical agents in all mineral base fluids may be detrimental to the resistance of the hose material

Stock information temporarily unavailable.

Please check again later.

Stock information temporarily unavailable.

P.O.A.

5m Rubber Cover Hydraulic Hose, 293 bar

P.O.A.

5m Rubber Cover Hydraulic Hose, 293 bar
Stock information temporarily unavailable.

Technical Document

Specifications

Brand

Parker

Manufacturer Series

381

Length

5m

Hose Outside Diameter

22.2mm

Inner Hose Material

Nitrile Rubber

Reinforcing Material

Steel

Cover Material

Rubber

Maximum Operating Pressure

293 bar

Maximum Operating Temperature

+100°C

Minimum Operating Temperature

-40°C

Product details

No-Skive Hose Type 381

High quality flexible hoses suitable for high pressure service
Synthetic rubber outer hose, reinforced with high tensile steel wire. Inner lining, Buna N (Nitrile)
Suitable for use with Series 30 reusable fittings
Temperature range -40°C to +100°C
Applications include high pressure service with petroleum base hydraulic fluids, water-glycol and water-oil emulsion hydraulic fluids, hot oil, grease, lubricants, crude and fuel oils, air and water
Supplied in 5m coils

Exceeds the following manufacturing standards: to DIN 20022 2SN-SAE 100 R2AT-150 1436//11
Pin prick cover for air or gas applications above 14 bar (200 psi)
Chemical agents in all mineral base fluids may be detrimental to the resistance of the hose material